Q3: Operating rules for the use of automatic die-cutting machines and safety standards for die-cutting machines
A3: 2. Standards and standards that need to be paid attention to in the production of die-cutting machines
1) Operate according to the production requirements of the construction order and the standard of signing samples.
2) During the production process, a sampling inspection is performed every 5-10 minutes, and quality problems are reported in time, and production can be continued after resolution.
3) After each version of die-cutting, a comprehensive inspection must be carried out and the Die-cutting Process Sheet must be filled in. If there is a quality problem, the products should be separated in time, and the Abnormal Product Flow Sheet should be filled in.
4) If material problems are found, production should be stopped, and the Feedback Form for Poor Quality of Production Materials should be filled in, so that relevant departments can coordinate and solve them to prepare for subsequent production.
3. Specifications and standards that need to be paid attention to after the production of the die-cutting machine
1) The captain should fill in the Moving and Cutting Daily Report Statistical Table of Process Quality Status and Daily Inspection of Production Equipment every day.
2) Separate the die-cut products into qualified and inferior products, and clearly identify them.
3) At the end of production, the equipment should stop at the mold opening position.
4) Maintain the equipment according to the daily maintenance content.
5) Fill in the shift record carefully.
6) Turn off the power.