Q1: How to adjust the film of the die cutting machine?
A1: First, the mold should be attached to the template, and then the materials that have been attached should be prepared. After positioning, the single punching and debugging should be carried out; the partial over-cutting or continuous, and then processing on PET or other pads. You can add some Xiao Yinlong and so on.
Q2: How does the die cutting machine work?
A2: Die-cutting machine is also called beer machine, CNC punching machine, which is mainly used for die-cutting of corresponding non-metallic materials, self-adhesive, EVA, double-sided tape, electronics, mobile phone pads, etc. (full break, half break) , Creasing and bronzing operations, laminating, automatic waste removal, die-cutting machine uses steel knives, hardware molds, steel wire (or the template carved from steel plate), and applies a certain pressure through the embossing plate to roll the printed product or cardboard. Cut into certain shapes. It is an important equipment for post-press packaging processing and shaping.
The working principle of the die-cutting machine is to use steel knives, hardware molds, steel wires (or stencils carved from steel plates) to apply a certain pressure through the embossing plate to cut the printed products or cardboard into a certain shape. If the entire printed product is press-cut into a single graphic product, it is called die-cutting; if the steel wire is used to make traces on the printed product or leave a bent groove, it is called indentation; Heated to a certain temperature, hot stamping of patterns or fonts with a three-dimensional effect on the surface of the printed product is called hot stamping; if one substrate is used to overlay another substrate, it is called laminating; except for the genuine product, the rest is called To discharge waste; the above can be collectively referred to as die cutting technology.
Q3: Operating rules for the use of automatic die-cutting machines and safety standards for die-cutting machines
A3: 1. Standards that need to be paid attention to before starting the die cutting machine
1) Check the handover records to understand the operation of the equipment.
2) In accordance with the production scheduling plan, check the quantity of die-cutting and the quality of the product according to the requirements of the production construction order.
3) After checking and confirming that there is no foreign matter on the machine, thoroughly inspect and adjust the machine.
4) Check whether the die cut is the same size as the box sample.
5) Check if the product has a mouth.
6) Choose bottom template material according to product quantity, paper type and carton structure.
7) Install the die-cut plate and lock the fastening screws to prevent the die-cut plate from loosening. Make the bottom template, the thickness of the bottom mold is the thickness of the die-cut product paper.
8) Install the bottom template, clean the surface debris and lock it tightly.
9) Adjust the die-cutting pressure according to the thickness of the paper. When adjusting, the pressure should be gradually increased from light to heavy to 80% penetration, otherwise it will cause equipment damage.
10) Adjust the position of the upper and lower thimble of the paper ejection part, and lock it.
11) After adjusting the various parts, check the box sample to request the production sample, check that there is no quality problem, and the supervisor can sign the sample and the normal production can be done.