1. For lawns that need to be punched, remove stones, wires, and other items that may cause dangerous accidents before starting work.
2. Spray the water on the lawn before punching to achieve the desired punching effect.
3. Mark the items that need to be evaded, such as nozzles and wires on the grass, in case of work.
4. Children should stay away from the punching machine.
5. Check the oil level of the gearbox before working.
6. Keep the rear wheel at the lowest position.
7. Make sure the belt is tightly closed and retractable.
8. Start the engine and adjust the throttle to the normal walking speed of the operator so that the operator can always control the machine comfortably.
9. Do not work on slopes with slopes greater than 30 degrees.
10. Do not place your hands or feet next to moving or rotating parts while the machine is running.
11. It is forbidden to open the transmission guard device during operation.
12. Do not arbitrarily change the various configurations of the lawn puncher.
13. It shall not be used for other ground operations other than lawn.