2020 China Mask Industry Status And Future Development Trend Forecast

Apr 09, 2020

Leave a message



China Business Intelligence News: When the Spring Festival is coming in 2020, the epidemic of the new coronavirus (2019-nCoV) has suddenly come and raged across the country. As the pneumonia epidemic of new coronavirus infection spread, the demand for masks surged. At the end of 2019, new coronavirus-infected pneumonia cases first appeared in Wuhan and gradually spread to all parts of the country, posing a huge threat to the safety of the people. After the outbreak, the public's demand for medical masks surged, and masks were quickly sold out everywhere. At present, under the background of epidemic situation, what is the prospect of the mask industry?
Respirator is a kind of sanitary product, generally refers to a device that is worn on the nose and mouth to filter the air entering the nose and mouth to prevent harmful gases, odors, and droplets from entering and leaving the wearer's mouth and nose. It is made of gauze or paper and other materials.

Mask type
According to the use, masks are generally divided into four categories: ordinary gauze masks, medical masks, daily protective masks and industrial dust masks.

Mask industry chain
The industrial chain of the mask industry is generally not complicated. The upstream is mainly the raw materials and production equipment for the mask production. The midstream is for the manufacture of various masks, and the downstream is the circulation of pharmacies and other masks. On February 2, 2020, at a press conference held by the Ministry of Industry and Information Technology, Wang Wei, director of the raw materials department of the Ministry of Industry and Information Technology, said that the raw materials for masks are mainly high-melt index fiber polypropylene, and domestic production capacity is relatively sufficient. The data shows that domestic production in 2019 is about 900,000 tons. One ton can produce 900,000-1,000,000 disposable surgical masks, and 200,000-250,000 N95 medical protective masks. It is worth noting that although the supply of raw materials is sufficient, the problem is that there is a lot of information asymmetry between the raw materials and the guaranteed supply, which means that the work of the scheduling platform is very important, and the supply and demand sides need to be closely connected.

In terms of materials for masks, the polypropylene high-melt non-woven special material has become the best choice. It produces polypropylene products with a melt mass flow rate of 33-41g / min, which meets the Eisai polypropylene non-woven fabric standard. In terms of fields, the special polypropylene fiber products are used in non-woven fabrics, fabrics, silk, medical surgical supplies, civilian hygiene products and other fields. In terms of hygiene, non-woven fabrics produced from special materials for polypropylene non-woven fabrics can be used in disposable surgical gowns, sheets, masks, drapes, liquid absorption pads, etc. Non-woven masks are made of fiber non-woven fabrics that are professionally used in medical and sanitation There are two layers in the cloth, and a layer is added in the middle to filter and dissolve more than 99.999% of the filter solution sprayed by ultrasonic welding. The non-woven fabric mask adopts a type of all plastic strip at the bridge of the nose, does not contain any metal, and is equipped with breathable, Comfortable.

From the perspective of the entire non-woven fabric output, China's non-woven fabrics (non-woven fabrics) increased exponentially in the early stage of the industry's development. From 1978 to 1997, China's non-woven fabrics annual output nearly doubled. Since the beginning of the 21st century, China's non-woven fabric output has maintained a growth trend. After the crisis in 2008, China's non-woven fabric output continued to increase year by year. In 2018, China's annual output of various non-woven fabrics reached 5.932 million tons, an increase of 196.31% The average compound growth rate reached 11.47%. In terms of applications, the current application of non-woven fabrics is concentrated on high-tech penetration and the use of new materials. It is widely used in industries such as, clothing, sanitary materials, aerospace, and environmental protection, especially in the hygienic materials market. With the expansion, the market for vehicle supplies, footwear and artificial leather is also showing new trends. With its high value-added and high-efficiency competitive advantages, non-woven fabrics have huge industry potential. China Business Research Institute predicts that by 2024, China's nonwoven production will exceed 8 million tons.

Under the pneumonia epidemic, "a cover is hard to find"
According to the official website of the National Health and Health Commission: from 0 to 24:00 on February 11, 2020, 31 provinces (autonomous regions and municipalities directly under the Central Government) and Xinjiang Production and Construction Corps have newly diagnosed cases in 2015 (1638 cases in Hubei), and newly added severe cases 871 cases (an increase of 897 cases in Hubei, an increase of 18 cases in another 7 provinces, and a total decrease of 44 cases in 12 provinces), 97 new death cases (94 cases in Hubei, 1 in each of Henan, Hunan, and Chongqing), newly suspected There were 3342 cases (1685 cases in Hubei). On the same day, 744 new cases were discharged (417 in Hubei), and 30,068 close contacts were released from medical observation.

As of 24:00 on February 11, according to the reports of 31 provinces (autonomous regions and municipalities) and the Xinjiang Production and Construction Corps, there were 38,800 confirmed cases (including 8,204 serious cases), 4,740 cases of discharge and 1113 cases of death. A total of 44,653 confirmed cases were reported, and 16,067 suspected cases are currently available. A total of 451,462 close contacts were tracked, and 185037 close contacts were still under medical observation. With the continuous development of the outbreak of coronary pneumonia and the arrival of the peak period of return, the supply and demand of masks in many places are tense, and even a situation of "a mask is difficult to find" appears.

The output value of the mask industry will exceed 13 billion yuan
In recent years, the output value of China's mask industry has maintained a stable trend, and the growth rate of output value has remained above 10%. Specifically: in 2019, the output value of the mask industry in mainland China has exceeded 10 billion yuan. Affected by the coronary pneumonia epidemic in 2020, the growth rate of the output value of medical masks will be significantly increased (the growth rate is expected to reach 28%), which will drive the growth of the entire mask industry output value.

Judging from the output value of the medical mask industry: the output value of China's medical mask industry in 2019 was 5.491 billion yuan, an increase of 15.48% year-on-year. Since the outbreak of pneumonia virus, China's medical masks were in short supply. It is expected that the output value of China's medical mask industry will increase significantly in 2020, and the output value will reach 7.882 billion yuan, accounting for 59.78% of the total output value of the mask industry.

The maximum daily capacity of masks reaches 2000
According to data from the Ministry of Industry and Information Technology, the current maximum daily capacity of masks is 20 million. According to the maximum production capacity, the annual output exceeds 7.3 billion.
In addition, China is the world's largest mask manufacturer and exporter, and its annual mask production accounts for about 50% of the world's total. According to data released by the China Textile Business Association, in 2018, China's mask production was about 4.54 billion pieces, in 2019 it exceeded 5 billion pieces, and it is expected to exceed 6 billion pieces by 2020.

The future development trend of the mask industry
1. Mask output will continue to rise
According to statistics from the Ministry of Industry and Information Technology, the maximum capacity of Chinese masks is more than 20 million per day. According to a survey by the French domestic radio station, the world's largest production base of medical masks is in China, which accounts for 80% of the world's production. At present, in the face of the pneumonia epidemic, the country is increasing production day and night. After the epidemic, the surplus production is collected and stored by the government. Enterprises that meet the standards can use full horsepower to organize production. It is expected that the output of masks will continue to rise in the future.

2. Professional masks will gradually occupy the market
With the continuous development of China's economy and the continuous improvement of people's living standards, people's consumption concepts and consumption levels have also undergone great changes and improvements. In recent years, with the strengthening of national attention to personal safety protection and the increase in the incidence of pneumoconiosis and other occupational diseases, the market space for professional masks is huge. Industry insiders pointed out that in the future, professional masks will continue to occupy the market, and the market share of low-end full-gauze masks will continue to decrease. This is an inevitable trend.
3. PTFE nano masks become a new direction for future development
Generally, the diameter of the core layer of ordinary medical surgical masks is relatively large, which cannot perfectly achieve the physical isolation of small particles of bacteria and viruses. The special feature of the nano mask is that the middle layer is made of nano with a smaller pore size (100-200 nanometers), generally PTFE material. The PTFE film prepared by one-way or two-way stretching method has a spider-web-type microporous structure on the surface, and has a very complicated change in the three-dimensional structure such as mesh connection, hole inlay, and channel bending, so it has excellent surface filtration Features. Nano masks have become a highly effective medical protective mask because of their high-efficiency filtration performance. In the future, nano masks will become a new direction for the development of masks.
The maximum daily capacity of masks reaches 2000
According to data from the Ministry of Industry and Information Technology, the current maximum daily capacity of masks is 20 million. According to the maximum production capacity, the annual output exceeds 7.3 billion.
In addition, China is the world's largest mask manufacturer and exporter, and its annual mask production accounts for about 50% of the world's total. According to data released by the China Textile Business Association, in 2018, China's mask production was about 4.54 billion pieces, in 2019 it exceeded 5 billion pieces, and it is expected to exceed 6 billion pieces by 2020.
The future development trend of the mask industry
1. Mask output will continue to rise
According to statistics from the Ministry of Industry and Information Technology, the maximum capacity of Chinese masks is more than 20 million per day. According to a survey by the French domestic radio station, the world's largest production base of medical masks is in China, which accounts for 80% of the world's production. At present, in the face of the pneumonia epidemic, the country is increasing production day and night. After the epidemic, the surplus production is collected and stored by the government. Enterprises that meet the standards can use full horsepower to organize production. It is expected that the output of masks will continue to rise in the future.

2. Professional masks will gradually occupy the market
With the continuous development of China's economy and the continuous improvement of people's living standards, people's consumption concepts and consumption levels have also undergone great changes and improvements. In recent years, with the strengthening of national attention to personal safety protection and the increase in the incidence of pneumoconiosis and other occupational diseases, the market space for professional masks is huge. Industry insiders pointed out that in the future, professional masks will continue to occupy the market, and the market share of low-end full-gauze masks will continue to decrease. This is an inevitable trend.
3. PTFE nano masks become a new direction for future development
Generally, the diameter of the core layer of ordinary medical surgical masks is relatively large, which cannot perfectly achieve the physical isolation of small particles of bacteria and viruses. The special feature of the nano mask is that the middle layer is made of nano with a smaller pore size (100-200 nanometers), generally PTFE material. The PTFE film prepared by one-way or two-way stretching method has a spider-web-type microporous structure on the surface, and has a very complicated change in the three-dimensional structure such as mesh connection, hole inlay, and channel bending, so it has excellent surface filtration Features. Nano masks have become a highly effective medical protective mask because of their high-efficiency filtration performance. In the future, nano masks will become a new direction for the development of masks.