In the extra bed processing industry, the application of automatic punching machines has greatly improved the work efficiency of material processing and shortened the construction period. In order to better play the role of punching machine equipment in the processing technology, it is not negligible to conduct a comprehensive inspection and maintenance of the equipment before using it. So, what are the necessary inspections to be carried out before the punching machine is used?
First, the addition and replacement of lubricating oil
When the automatic punching machine is working, all movable parts need lubricating oil to reduce friction and increase lubrication. Therefore, before using the automatic punching machine, the lubricating oil at the transmission shaft, gears, connecting rod joints and other important parts should be tested. When the amount of lubricating oil is found to be less or thicker, it should be replaced or added in time, so that both It can ensure the normal operation of the equipment and also extend the service life of the equipment.
Second, the inspection of foreign objects
Before using the automatic punching machine, check the punches, lower sharpening edges and other places in advance to see if there are any foreign objects such as residual metal. If there are foreign objects, they must be cleaned up in time before running the equipment. If there are foreign objects but not cleaned up, it is likely to affect the normal operation of the punching machine.
Third, determine the temperature of the punching material
Generally speaking, the temperature of the punching material is also related to the life of the punching equipment. If the punching material is processed when the temperature is high, it is prone to punching, and long-term hot punching will shorten the life of the automatic punching machine. Therefore, make sure that the material has been cooled before punching. .
Finally, before using the automatic punching machine, it is necessary to determine whether the air pressure used by the equipment falls within the 4-5KG/CM air pressure range specified by the state. Too high or too low air pressure will cause the punching machine to fail to operate normally.
Hengsheng Automation wins customers with technology and achieves a win-win situation through cooperation! We will take the customer first, take science and technology as the forerunner, continue to innovate and continuously improve, and provide customers with cost-effective, highly reliable products and satisfactory services. The feedback of users is the spur to us. We always insist on quality first , user first , quality service sincerity and trust and develop new products with higher technical content and more suitable for users' needs. Zero complaint is our pursuit from beginning to end! Sincerely welcome customers to negotiate business.