The automatic punching machine consists of a processing table, a control computer, a rotating motor, a vibration motor, a machining tool head, a pneumatic device, an automatic turntable, and a fixed fixture.
work process:
1. Make fixing fixtures according to the size of the machining, the number of machining holes, the size of the machining holes, and the machining hole position data. Fasten the clamp and the automatic turntable.
2. Set the processing data in the control computer.
3. Fix the material to be processed on the automatic turntable.
4. Start the machine. The machine completes the drilling, drilling, milling, through hole, blind hole, porous, high and low hole processing procedures according to the computer instruction and processing data.
5. After the hole is processed, the automatic drilling disc will rotate a certain angle according to the set program, align the position of the next machining hole with the machining head, and start machining again. After the entire turntable has been processed, a machining process is completed. Remove the processed material. Refill.
6. During the processing, if the material is encountered and the material is missing, the machine will immediately alarm and stop working and wait for processing.
7. During the processing, when the processing tool head is not sharp, the machine will immediately alarm and notify the replacement tool.
