1. The user should wipe and refuel the screen printing machine at least once a week as required;
2. Regularly check the water accumulation in the filter water cup of the screen printing machine, drain the water once every shift, and avoid bringing water into the cylinder;
3. Lubricating oil needs to be added to each lubrication point regularly to ensure the normal operation of the screen printing equipment;
4. Before each start-up, you must first understand the operating range of the machine, connect the air source and power supply, and check the operation of the machine, before it can be put into production use when it runs normally;
5. The whole machine adopts full touch screen control. Because the touch screen is easily damaged, it is strictly forbidden to be hit or scratched by hard objects or sharp objects;
6. Please try to keep the screen printing equipment clean. If there is dirt, please wipe it with a soft and clean dry cloth; if it is difficult to remove the dirt, you can add a little neutral detergent to wipe it, and it is strictly forbidden to wipe with alcohol or thinner.
7. Do not place work, quantity, clamps, cutting tools, workpieces, raw materials, etc. on the screen printing machine.
8. It should be ensured that the joints of the movable guide surface and the guide surface of the screen printing machine are free of dust, dust, oil, no fuzzing, scratches, etc.
9. Do not disassemble the touch screen without the guidance of a professional master, it is easy to damage the touch screen;
10. If the screen printing machine is not used for a long time, the screen printing machine should be wiped clean and placed in a cool, dry and well-ventilated environment; sharing from Shenzhen Vility Automatic Machinery Co., Ltd.
11. When the screen printing machine fails, you must immediately press the emergency stop switch and then turn off the main power supply, and notify the maintenance personnel;
12. In the daily maintenance of the screen printing machine, it is strictly forbidden to disassemble parts and components, and stop immediately if there is any abnormality;
13. It is necessary to carry out general inspections, accuracy inspections and adjustments of the equipment on a regular basis, and carry out failure analysis and status monitoring;