Now many shops with printers appear in many local shops, and these printers have gradually replaced the traditional backward hand printing with regard to machine printing. The screen printing machine far surpasses manual printing in terms of technology, speed, and quality. However, the questions that arise during the use of the screen printing machine have repeatedly appeared. Because there are many methods and machines in the printer, it is necessary to pay attention to its maintenance during the production process, and the screen printer is a problem that requires usual maintenance and maintenance. The machine, let me talk about its technical questions in this regard.
It cannot allow too much water and oil to enter the air pressure system to avoid cylinder shortcomings and shorten the service life of the cylinder, to ensure the monotonous and clean compressed air, if possible, it is best to install a refrigerated monotonic machine; check the converter every day Whether the oil volume of the oil cup is satisfactory, the pressure relief valve should be placed on the back if it is not used for a long time; when the work is stopped, the main power switch should be turned off and the air supply should be tightened; the speed control valve cylinder and the axis of each part should avoid magnetic loss ; The horizontal sliding seat part of the worktable and the precise and highly coordinated components must be cleaned and oiled frequently for maintenance to prevent the precision from being affected by rust.